EMK Electrical Cabinet Cooler
This series stands out due to particularly strong fans. The air ducts can be installed on both sides, to the left or to the right, as needed. Cooling capacities of up to 25 kW with air inlet/outlet temperatures of 45/34 °C with a water inlet temperature of 26 °C.
ORS Electrical Cabinet Cooler
The electrical cabinet and device coolers of series ORS operate on the basis of heat exchangers water/air. So they need water in the form of cooling tower water, circuit water, well water etc. The cooler capacity depends on water temperature, water quantity and air temperature. The warm air is sucked out of the cabinet at the top, cooled down and then blown in again at the bottom. There are threads on the base plate to screw on the complete device from the inside of the electrical cabinet.
GR Electrical Cabinet Cooler
The device cooler GR operates on the basis of heat exchangers. So it needs water in the form of cooling water, well water etc. The cooler capacity depends on water temperature, water quantity and air temperature. Therefore, a closed air circuit should be preferred. Besides cool air an adequate airstream and ventilation duct avoiding heat pockets is also necessary for the cooling process. With their large-dimensioned heat exchangers and appropriate fans Schwämmle cabinet coolers fulfil all these requirements.
from 1.935,00 €
ELW Finned Heat Exchangers
The heat exchangers of series ELW are finned heat exchangers for cooling and heating of normal and corrosive liquids like, for example, de-ionized water. Additional benefits: All water-swept parts made of stainless steel, very space-saving chamber design. Other dimensions are possible within modules, the fins can be made of copper or stainless steel.
Various fin spacings, performance optimization through low pressure losses. Water quantity from 4 to 16 l/min., also available as a complete unit with fan.
from 394,32 €
SN Double Cross-Flow Heat Exchangers
The heat exchangers of series SN are double cross-flow heat exchangers made of stainless steel. Thanks to their design they offer many advantages. The special surface of this device leads to very high heat transfer values and a cleverly devised water circuit requires only very small quantities of liquid which, in turn, results in low flow speeds.
Side A has been developed particularly for larger and side B for smaller quantities. Therefore, the consumption in this cooling application is low. Additional benefits: Very small dimensions compared to the cooling capacity of this device. No seals, flow chicanes made of teflon in side B.
from 565,00 €
Immersion Cooler OBK
The OBK Immersion Cooler series is used to cool oil or emulsion in tanks. The devices are placed onto the tank and then immerse in the liquid. Cooling is normally effected against recirculating air. Water-cooled devices are also possible. Temperature range of the medium is between 10 and 28 °C. Immersion coolers are placed onto the tank and then immerse in the liquid with their evaporator. The evaporator has a very flat design and is therefore particularly suitable for very shallow tanks.